Author Topic: [ISSI] - put a new wizard page  (Read 9002 times)

0 Members and 1 Guest are viewing this topic.

Offline Cambalinho

  • Lurker
  • *
  • Posts: 2
    • View Profile
[ISSI] - put a new wizard page
« on: 15 November 2010, 10:01:19 »
ok... i build my own wizard password page and works fine. my problem is here:
Code: [Select]
[issi]
#define ISSI_Playmidi "Fundo_1.mid"
;#define ISSI_Image "Figura_1.bmp"
#define ISSI_UseMyInitializeWizard
#include "D:\Documents and Settings\Joaquim Miguel\Os meus documentos\Programação\Visual Basic 6.0\Executar Jogos\Setup\SenhaWizard.txt"
#define ISSI_IncludePath "C:\ISSI"
#include ISSI_IncludePath+"\_issi.isi"
why i must(or gives an error) put the 1st 2 lines(sound and image) (both or 1)?
in these case i want put, only, the text file.

Offline Cambalinho

  • Lurker
  • *
  • Posts: 2
    • View Profile
Re: [ISSI] - put a new wizard page
« Reply #1 on: 16 November 2010, 08:53:25 »
or my wizard page isn't showed. i have tested.
i only want show my wizard
see the test setup: http://www.megaupload.com/?d=S1QWS51N
thanks

Offline Miral

  • Administrator
  • *****
  • Posts: 61
    • View Profile
    • Thoughts from Mirality
Re: [ISSI] - put a new wizard page
« Reply #2 on: 18 November 2010, 07:18:46 »
Since ISSI is not one of my Inno scripts or pages, you should be asking this in the official newsgroups instead.